JB Unicorn 3-9x40 Scope and Picatinny
Weaver Mounts Included!
Description:
The SD96 is modeled after the infamous L96 winter rifle used by British Royal
troops today. Highly accurate, rigid construction, realistic bolt, included
scope and adjustable cheek rest make the SD96 one of the best airsoft sniper
rifles we sell. We have pulled groupings of 2-3 inches at 50 ft using .20 gram
BBs and 1 1/2 inch or less using .28 gram BBs. With accuracy like this a human
size target is easy to hit at 150-200 feet once you have scope zeroed in and
adjust for wind and drop. The included tri-rail bi-pod adapter is on a swivel
point like the actual fire arm so when you are prone you can have the rifle
comfortable against your self.
Our favorite thing about the SD96 is the affordability it offers compared to
most L96 replica airsoft guns. Let alone do you get the SD96 rifle you also
get the JB Unicorn 3-9x40mm scope and mounting rings. A must have for any marksman,
indoor target shooter or skirmisher looking for a reliable and accurate sniper
rifle.
Features :
Rigid two piece construction
Metal barrel and bolt assembly
Lightweight polymer stock
Thumb hole stock design
Adjustable cheek rest
Realistic bolt action spring mechanism
Large bolt with ball end for winter glove use
Front and rear sling adapters
Fully functional safety
Built in trigger safety
Tri-rail Picatinny Weaver bi-pod adapter included (bi-pod not included)
Picatinny Weaver for optics and scopes
JB Unicorn 3-9x40 scope with mounting rings included
Specifications:
Body Components: Metal Barrel Assembly with Polymer Stock
Overall Length: 45 inches
External Barrel: Metal
Hop Up: Adjustable
Fire Mode: Bolt-Action
Gun Weight:
Muzzle Velocity: 450-480.00 FPS with .20 gram (box says 465.00 which is the
average)
Front Sight: None
Rear Sight: None
Effective Range: 150-200 feet
Scope Brand: JB Unicorn
Magnification 3X -9X
Obj. Lens: 40mm
Field of View: 25 ft -14 ft
Weight: 12.2 oz (.76lbs)
Eye Relief: 3.3 - 2.7 in
Exit Pupil: 13.3 mm - 4.4mm
Click Value: @100 yds - 1/4 inch
Package includes:
TSD SD96 bolt action airsoft rifle, two 30 round magazines, JB Unicorn
3-9x40 metal scope, Picatinny Weaver rings, tri-rail bi-pod adapter, speed loader,
sling, unjamming rod and 50 .20 gram BBs.
We recommend only using high quality .20g and .25g BBs for higher performance,
better accuracy and to prolong the life of your gun.
Simple steps on out how at assembly your SD96
1) Remove the barrel assembly and stock from the box. Remember to remove the
magazine that is inserted the stock already.
2) Insert the barrel assembly into the stock, bolt end first. Then push down
on the front end until it clicks into place.
3) Bolts are pre-installed into the stock. There is one located right behind
the mag well between the magazine well and the trigger guard. The second is
located behind the trigger guard. Have the long Allan wrench (included) ready.
4) In between the mag well and trigger guard hand tighten the pre-installed
bolt.
5) Behind the trigger hand tighten the pre-installed bolt.
6) Attach your scope, load up your magazine than insert into the gun and pull
back the bolt. Your ready to go!
Features:
- Full Size - Metal and Plastic
- Velocity: 480.00 (max) FPS with .20 gram BBs
- Rate of Fire: Single Shot Bolt Action
- Gearbox: N/A
- Battery: N/A